Hurricane Intelligent AM Medium Wave Transmitter EU

  • Click to enlarge
  • Click to enlarge
Hurricane Intelligent AM Medium Wave Transmitter EU

Tap for gallery


Product Information

Hurricane Intelligent AM Transmitter EU Version with 9KHz Channels and UK & EU power Lead

The Hurricane is our next generation intelligent AM Modulator, featuring a Digital Frequency Synthesizer controlled by a high-performance RISC-based Microcontroller with optional Bluetooth Audio and Bluetooth remote control.

With the Hurricane AM Modulator, it is easy to transmit high quality audio to any AM broadcast band radio receiver.

The Hurricane transmitter is ready built and ready to an affordable price...with the performance and features of units costing many times the price...!


Wired - simply connect the supplied audio cable to your audio sources (i.e. PC sound card, MP3 player headpnone or line output and your ready to go.

Bluetooth BLE- with the Bluetooth Streaming option, you can simply pair the Hurricane with your Bluetooth Audio source and stream using Bluetooth.
Note: Bluetooth BLE Audio Streaming is an option.


Local - Simply connect the supplied 3M antenna to the socket marked ANT and you ready to go

Menu & Front panel

Simply set the desired frequency using the front panel buttons.
You can select to display the frequency in kHz or in Meters
Adjust the Audio Gain gain level using the front panel.buttons
Select the VU Meter Bar to view the Audio feed in real time
Select the Modulation Monitor to view modulation depth (%)
View the Antenna voltage to check antenna is tuned correctly
Select the 800Hz test tone to locate the signal


Remote Control - with the Bluetooth BLE Remote Control option, you can control the Hurricane using an APP with an Android Phone or Tablet, an iOS device like a iPhone or iPad.
Note: Bluetooth BLE Remote Control is an option.

Software Command Line - using Bluetooth BLE Terminal APP for Android and iOS. The Bluetooth Terminal APP are available now and downloadable from the Google and Apple Store for Android and iOS

Software Graphic UI - for Android phone or Tablet, the APP is downloadable from this website (release date June 2021)

Typical Installation


All Models EU and US

  • Easy setup, using the built in Menu and OLED display.
  • Frequency range 520kHz to 1730kHz (Medium Wave)
  • Frequency default to 1600kHz / US or 1440kHz / EU
  • Channel spacing default 10kHz / US or 9kHz / EU
  • Power Output:  LPAM 100
  • Built in
    • Audio VU meter
    • Modulation monitor
    • Antenna Voltage meter
  • Audio connector: 3.5mm Jack Socket
  • Audio input: Mono or Stereo signal
  • High quality modulation depth and linearity.
  • Compliant with FCC Part 15 rules. (US Only)
  • Crystal controlled Digital  Frequency Synthesizer.
  • RISC-based Microcontroller.
  • Frequency range 1800kHz to 2000kHz (160M)
  • External 115/230 volt regulated 15 Volts DC supply.
  • Correct country specific power plug, US, UK, EU and OZ.
  • Power connector: 2.1mm coaxial (tip positive)
  • External Ground Connections
  • Antenna connector: RCA Phono or BNC
  • Standard 3 meter (9 foot) wire antenna.
  • Audio Cable 3.5mm Male to Male Jack plug.
  • Fully Built and Tested: High Quality PCB, Plastic CASE to IP56

Optional Features (Hardware)

  • Bluetooth Audio Streaming
  • Bluetooth  Remote Control

Optional Software (down loadable)

  • Bluetooth BLE Remote Control APP (Android)
  • Bluetooth BLE Terminal APP (Android)
  • Bluetooth BLE Terminal APP (iOS)

Fully built and tested, and supplied with "universal" switch mode power supply, standard 3 meter wire antenna and audio cable.

The Hurricane printed circuit board uses a grounding technique that splits the RF and Audio grounds, as well as providing and external grounding point. In addition a new external "universal"power supply provides regulated DC power to the transmitter, supplied with county specific power leads for the EU, UK, US and OZ


This product is available for shipping to

  • Worldwide subject to any country specific regulations

All specifications subject to change without notice

EU R&TTE directive and EMC Directive 2004/108/EC - in order to purchase this item, you must agree that:-

1. For use in the Netherlands for a “laagvermogen AM” (LPAM) license granted by Agentschap Telecom.
2. The item will only be used within a completely RF screened and shielded metal enclosure or environment for testing, evaluation, experimental or laboratory purposes and any other use that does not radiate electro-magnetic waves into free space.
I am not an unqualified end user and I have RF engineering and electromagnetic compatibility skills at my disposal.
3. You intend to export the item to an address outside the European Union. Under no circumstances will this item be resold or put into service within the European Union.

4. For use by a Licensed Radio Amateur on 160M Band


This field is required.

©2018 - All rights reserved.

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed. Continue if you wish to unsubscribe.

©2018 - All rights reserved.

eCommerce by CubeCart